Automated IC Programming System I.C.T-910

Min. Order : 1

Payment Type : L/C,T/T

Incoterm : FOB

Delivery Time : 60 working days

Brief introduction : The IC Programming System is a highly efficient, fully automated, intelligent IC programming machine designed for the production of large quantities of electronic products.

Automated IC Programming System

❙ Introduction of Automated IC Programming System:

The Programming System is a highly efficient, fully automated, intelligent IC programming machine designed for the production of large quantities of electronic products. each module is completely independent, programming speed is fast and efficiency is much higher than parallel mass production programmers. The system design modules are optimised for short project switching times and high reliability.

Exercise system:

Exercise system.png

1. High-precision Panasonic servo motor, repeatable positioning accuracy reaches ±0.015mm;
2. Double linear slide rails + high-precision screw rods cooperate with each other to ensure the stability of the overall machine;

3. Each axis has a limit sensor, and the software sets the limit position to ensure maximum machine safety.

Feeder system:

Feeder system.png

Programming system:

IC Programming Programming system.png

1. It has 8 work areas, supports large-volume programming, and greatly improves programming production efficiency;
2. Modular design, no cumbersome steps are required to switch products, just replace the programming adapter;
3. Exclusive one-to-one customized programming adapter, supporting multiple IC types, including EEPROM, NAND/NOR FLASH, MCU, etc;
4. To fix the NG recycling box, you can place a tray next to it as an NG tray or as a refill tray. After NG, replenish a component from this tray and
reprogram it to ensure that the OK tray is full;

5. Can be compatible with customers' own programming adapters according to usage requirements.

Operating system:

Operating system.png

1. The all-English interface meets international needs, and the software is easy to learn and operate;

2. It can monitor machine action status, programming NG/OK, XYZ axis position, camera calibration, etc., in real time.

 Specification of Automated IC Programming System:

Transmission system
Efficiency of the machine
Standard machine:
Equipped with universal burner of Puro and other brands: 8 sets of 32-64sit
burners: UPH 2000-3000PCS/H;
Equipped with 204AP brand universal burner: 3 sets of 12sit burners:
A small number of diverse modes: equipped with 3 sets of 204A burners, UPH
Packaging conversion mode: pallet to tape production capacity of 4000PCS/H
(12mm tape products as an example)

Control precision

Precision servo screw drive, accuracy: X-axis ±0.015mm; Y-axis ±0.015mm; Z-axis
±0.03mm; P-axis ±0.03mm; U(θ)-axis ±0.15°

Suitable package form

EBGA, FBGA, VFBGA, BGA, CSP, SCSP, and so on. (Open Top adapters, some ICs
need to be customized with special adapter consumables).

Includes precision upper and bottom CCD positioning system.

* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
I.C.T is the SMT Machine Supplier with 25 Years of Experience, Providing Integrated SMT Solutions Including SMT Pick and Place Machine, Reflow Soldering Oven, SMT line, and Providing the Best global SMT Technical Services and Accessories Support.
Detailed Images
Products Size
Packaging & Shipping
Our Services
Automated IC Programming System I.C.T-910